Description
For Numato Products Price details/ quotation please mail your requirements on dolphinlabs17@gmail.com
Numato’s 16 Channel Ethernet GPIO module is low cost easily deployable solution for connecting your PC to other electronic circuitry through a network. This GPIO module can be accessed through a simple web interface or Telnet. Ease of use and wider operating system compatibility are the primary goals behind this product’s design. This simplicity allows the use of off-the-shelf Terminal Emulation programs such as HyperTerminal and TeraTerm for controlling the module with a simple set of human-readable commands through Telnet or through easy to use Web interface. For power users, this module can be controlled by writing programs in various programming languages.
Features
- 16 TTL (3.3V) compatible GPIOs available
- All GPIOs can be individually configured as input or output
- Can be controlled by using a simple web interface or Telnet
- No TCP/IP protocol knowledge required
- 10 Analog input channels (Multiplexed with GPIOs)
- 10 Bit Analog input resolution
- 2,25ma Source/Sink capacity(depend on the IOs).
- Unique MAC Address.
- Reset Jumper: Resets the board to factory defaults.
- Password-protected Web console and Telnet communication interface.
- LED indication for Power.
Applications
- Home Automation
- Lighting Control
- Garden Equipment Control
- Industrial Automation
- Test Fixtures
- DIY and Hobby
-
An AND gate can be built using BC547 NPN transistors, a common general-purpose transistor used in digital circuits.
The circuit represents both the inputs A & B for the AND gate and Output, Q, which also has a +5V supply to the collector of the first transistor, which is connected in series to the second transistor, and an LED is connected to the emitter terminal of the second transistor. The inputs A & B are connected to the base terminal of Transistor 1 and Transistor 2, respectively, and the output Q goes to the positive terminal LED.
₹190.00 -
For Numato Products Price details/ quotation please mail your requirements on dolphinlabs17@gmail.com
₹8,785.00 -
For Numato Products Price details/ quotation please mail your requirements on dolphinlabs17@gmail.com
₹2,664.00 -
The Conveyor Belt Object Counter using LDR and 7-Segment Display with the 8051 microcontroller is designed to count objects passing in front of an LDR (Light Dependent Resistor) sensor. The system works by detecting light interruptions when an object crosses the sensor, causing a change in the LDR’s resistance. The microcontroller processes this change and increments an object count. The count is then displayed on a 7-segment display.
-
An XOR (Exclusive OR) gate is a digital logic gate that outputs true (1) only when the number of true inputs is odd. For two inputs, the output is high when the inputs are different. XOR gates can be constructed using basic logic gates or directly with transistors (BJT or MOSFET). Using transistors, we can design compact, efficient circuits for custom digital logic applications.
₹160.00 -
A Traffic Light Signal is an electronic project designed to manage vehicle and pedestrian traffic at intersections. Using Arduino, LEDs (Red, Yellow, Green), and an LCD, the system simulates real-world traffic light behavior, displaying signal changes with appropriate timing. This project demonstrates traffic management, embedded system programming, and microcontroller-based automation.
Related products
-
₹15,559.00 -
-
For Numato Products Price details/ quotation please mail your requirements on dolphinlabs17@gmail.com
₹25,890.00 -
-
₹4,243.00 -
