Hall Effect Alarm
₹210.00
In StockA Hall Effect Alarm is a type of security or position-detection system that uses a Hall Effect sensor to detect the presence or movement of a magnet. When the magnetic field changes (such as a magnet being removed or moved), the circuit triggers an alarm (buzzer, LED, relay, etc.).
Description
The Hall Effect sensor detects magnetic fields and converts them into electrical signals. It’s commonly used in:
- Proximity sensors
- Speed sensors
- Position detectors
- Security systems
In a Hall Effect alarm system, a magnet is placed near the Hall sensor. As long as the magnet is near, the sensor maintains a stable output (either HIGH or LOW depending on sensor type). If the magnet is removed, the sensor’s output changes, which triggers an alarm, such as a buzzer or LED. This type of system is widely used in door security, lock systems, and industrial safety applications.
Applications:
1.Door or Window Alarms
1.Magnet on door, sensor on frame — removing the magnet triggers the alarm.
2.Locker or Safe Security
1.Alarm triggers when magnetic field is disturbed (indicating opening).
3.Speed or Position Sensing
1.Magnet attached to rotating object; sensor detects movement.
4.Industrial Equipment Monitoring
1.Ensures safety by detecting unexpected movement or opening.
5.Bicycle Theft Detectors
Alarm when magnetic lock is tampered.
-
₹82,650.00 -
For Numato Products Price details/ quotation please mail your requirements on dolphinlabs17@gmail.com
₹5,480.00 -
A digital ruler is an electronic measuring device that provides precise measurements of length, width, or depth. Unlike traditional rulers or tape measures, digital rulers use sensors and electronic displays (often LCD or LED) to show measurements accurately, usually in both metric (mm/cm) and imperial (inches) units. They are widely used in engineering, design, woodworking, tailoring, and education where precision is critical.
-
A Light Activated Motor Controller using IC 555 is a simple electronic circuit that turns a motor ON or OFF based on the presence or absence of light. It uses a LDR (Light Dependent Resistor) as a light sensor and the 555 timer IC in a comparator mode, along with an LED to indicate the motor’s status.
₹280.00 -
A digital thermometer project using the 8051 microcontroller involves interfacing a temperature sensor, like the LM35, with the microcontroller to measure temperature. The 8051 processes the sensor data and displays the temperature on LCD.
Related products
-
A Security Alarm Circuit using the LM358 IC is a simple yet effective system designed to trigger an alarm when unauthorized access or movement is detected. The LM358, a dual operational amplifier (Op-Amp), is used as a comparator to detect voltage changes from sensors like LDRs, IR sensors, or switches, and then activate a buzzer or relay.
₹200.00 -
A traffic light control circuit using IC CD4017 is a simple digital electronics project that mimics the working of a real traffic light system. It uses the CD4017 decade counter IC along with a timer (usually 555 IC) to sequentially switch Red, Yellow, and Green LEDs, simulating the flow of traffic signals.
₹250.00 -
An Automatic Street Light using the IC 555 is a simple circuit that turns street lights ON at night and OFF during the day automatically. It uses a Light Dependent Resistor (LDR) to detect ambient light and a 555 Timer IC configured in comparator mode to control the switching.
₹175.00 -
A Tri-Tone Buzzer is an audio signaling device that produces three distinct tones in a sequence or pattern. It’s commonly used in alarms, emergency systems, and attention-grabbing devices to indicate different conditions or alert levels.
₹180.00 -
An RGB LED is a light-emitting diode that combines Red, Green, and Blue LEDs in a single package. By adjusting the brightness of each color, it can produce millions of colors, making it ideal for decorative lighting, displays, and indicators.
₹140.00 -
A Flip-Flop LED Flasher is a simple electronic circuit that alternately turns two LEDs on and off in a continuous loop, creating a blinking or “flashing” effect. It’s commonly built using transistors, resistors, capacitors, and LEDs, forming an astable multivibrator — a basic circuit that oscillates between two states without any external triggering.
It’s often used for decoration, indicators, or learning basic electronics.
₹175.00
