Description
For Numato Products Price details/ quotation please mail your requirements on dolphinlabs17@gmail.com
MIMAS V2 is a feature-packed yet low-cost FPGA Development board featuring AMD Spartan-6 FPGA. MIMAS V2 is specially designed for experimenting and learning system design with FPGAs. This development board features AMD SPARTAN XC6SLX9 CSG324 FPGA with onboard 512Mb DDR SDRAM. The USB 2.0 interface provides fast and easy configuration download to the onboard SPI flash. No need to buy an expensive programmer or special downloader cable to download the bitstream to the board.
Features
- FPGA: AMD Spartan XC6SLX9 in CSG324 package
- DDR Memory: 166MHz 512Mb LPDDR (MT46H32M16LF/W949D6CBHX6E)
- Flash memory: 16 Mb SPI flash memory (M25P16)
- USB 2.0 interface for On-board flash programming
- FPGA configuration via JTAG and USB
- 8 LEDs, Six Push Buttons, and 8 way DIP switch for user-defined purposes
- VGA Connector
- Stereo Jack
- Micro SD Card Adapter
- Three-Digit Seven Segment Displays
- 32 IOs for user-defined purposes
- Four 6×2 Expansion Connectors
- Onboard voltage regulators for single power rail operation
Applications
- Product Prototype Development
- Signal Processing
- Learning Digital Electronics
- Educational tool for schools and universities
-
An AND gate can be built using BC547 NPN transistors, a common general-purpose transistor used in digital circuits.
The circuit represents both the inputs A & B for the AND gate and Output, Q, which also has a +5V supply to the collector of the first transistor, which is connected in series to the second transistor, and an LED is connected to the emitter terminal of the second transistor. The inputs A & B are connected to the base terminal of Transistor 1 and Transistor 2, respectively, and the output Q goes to the positive terminal LED.
₹190.00 -
A Tank Overflow Indicator using Arduino, a water sensor, and a buzzer that alerts the user by buzzing when the water tank overflows.
-
A Light Activated Motor Controller using IC 555 is a simple electronic circuit that turns a motor ON or OFF based on the presence or absence of light. It uses a LDR (Light Dependent Resistor) as a light sensor and the 555 timer IC in a comparator mode, along with an LED to indicate the motor’s status.
₹280.00 -
A Flip-Flop LED Flasher is a simple electronic circuit that alternately turns two LEDs on and off in a continuous loop, creating a blinking or “flashing” effect. It’s commonly built using transistors, resistors, capacitors, and LEDs, forming an astable multivibrator — a basic circuit that oscillates between two states without any external triggering.
It’s often used for decoration, indicators, or learning basic electronics.
₹175.00 -
₹27,840.00 -
A solar-based LED system is a lighting setup that uses solar energy to power LED (Light Emitting Diode) lights. During the day, a solar panel captures sunlight and converts it into electrical energy, which is stored in a battery. At night or in low-light conditions, this stored energy powers the LED light.
These systems are eco-friendly, cost-effective, and ideal for off-grid or outdoor applications like street lighting, garden lights, and emergency lighting.
₹250.00
Related products
-
₹10,401.00 -
For Numato Products Price details/ quotation please mail your requirements on dolphinlabs17@gmail.com
₹2,664.00 -
-
₹4,745.00 -
₹4,745.00 -
