Smart Temperature Controlled Fan
₹1,350.00
In StockAn Arduino-based smart fan that automatically adjusts its speed according to temperature changes using an LM35 sensor and a DC motor driver.
Description
This project implements a Smart Temperature-Controlled Fan using Arduino, an LM35
temperature sensor, and a DC motor driver. The fan automatically adjusts its speed based on the surrounding temperature detected by the LM35 sensor. When the temperature rises above a set threshold, the DC motor driver (L298N or L293D) increases the fan speed accordingly. This system is ideal for automatic cooling solutions, improving energy efficiency and convenience in homes, offices, and industrial environments.
Features: Automatic speed control
Energy efficient
Real-time Monitoring
Applications: Smart Home and Offices
Industrial Cooling
Agriculture and Green Houses
-
A traffic light control circuit using IC CD4017 is a simple digital electronics project that mimics the working of a real traffic light system. It uses the CD4017 decade counter IC along with a timer (usually 555 IC) to sequentially switch Red, Yellow, and Green LEDs, simulating the flow of traffic signals.
₹250.00 -
A digital ruler is an electronic measuring device that provides precise measurements of length, width, or depth. Unlike traditional rulers or tape measures, digital rulers use sensors and electronic displays (often LCD or LED) to show measurements accurately, usually in both metric (mm/cm) and imperial (inches) units. They are widely used in engineering, design, woodworking, tailoring, and education where precision is critical.
-
A Bird Bell is a device designed to either attract, entertain, or repel birds, depending on its purpose and context. Traditionally, it is a small bell-shaped object made of metal, ceramic, or wood, and is usually hung in gardens, balconies, farms, or near bird feeders. Its name comes from its interaction with birds — it may ring when birds land on it, brush past it, or when the wind causes it to move.
₹190.00 -
A Flip-Flop LED Flasher is a simple electronic circuit that alternately turns two LEDs on and off in a continuous loop, creating a blinking or “flashing” effect. It’s commonly built using transistors, resistors, capacitors, and LEDs, forming an astable multivibrator — a basic circuit that oscillates between two states without any external triggering.
It’s often used for decoration, indicators, or learning basic electronics.
₹175.00 -
₹15,559.00 -
A Battery High-Low Monitor is an electronic circuit or device that detects and indicates the voltage level of a battery — whether it’s too high (overcharged), normal, or too low (discharged). It helps protect batteries from overcharging or deep discharge, which can damage the battery or reduce its lifespan.
These monitors often use comparators, voltage dividers, LED indicators, or microcontrollers to track and display battery status in real time.
₹225.00
Related products
-
An Arduino-based smoke detection system using an MQ-3 sensor, buzzer, and LCD display to alert users when smoke or harmful gases are detected.
₹1,450.00 -
A Digital Lock System is an electronic security project designed to control access using a password entered via a keypad. It utilizes an Arduino, keypad, LCD, servo motor, and buzzer to provide a safe, automated locking mechanism. When the correct password is entered, the lock opens; if the wrong password is entered, an alert is triggered. This project is widely used in home security, lockers, safes, and access-controlled systems.
-
A Vibration Detection System using Arduino, a vibration sensor, and a buzzer that triggers a sound alert when vibrations or movements are detected.
-
A Room Temperature Monitoring System measures and displays the temperature inside a room and alerts the user when it goes above or below preset limits. It ensures comfort, safety, and energy-efficient temperature control.
-
An Automatic Door System using Arduino, an ultrasonic sensor, and a servo motor that detects an approaching object and opens the door automatically.
-
A Temperature and Humidity Monitoring System using Arduino and a DHT11 sensor that measures and displays real-time temperature and humidity data on the serial monitor.
