Tri-Tone Buzzer
₹180.00
In StockA Tri-Tone Buzzer is an audio signaling device that produces three distinct tones in a sequence or pattern. It’s commonly used in alarms, emergency systems, and attention-grabbing devices to indicate different conditions or alert levels.
Description
Unlike a standard buzzer that emits a single tone or continuous beep, a Tri-Tone Buzzer creates a sequence of three different audio frequencies, often in a repeating pattern. This makes it more noticeable and suitable for environments where different sound cues are required.
The tri-tone sound can be generated using:
- Oscillator circuits (with 555 timers)
- Microcontrollers (like Arduino or PIC)
- Audio ICs (like UM3561, HT2811)
Each tone is generated at a different frequency, typically around 500 Hz, 1 kHz, and 2 kHz, with brief delays or switches in between to make the pattern recognizable and rhythmic.
Applications:
1.Emergency Alarms
1.Used in fire alarms, hospital alerts, and evacuation systems.
2.Security Systems
1.Alerts with distinct tones for intrusion, power failure, or tampering.
3.Vehicle Warning Systems
1.Multi-tone indicators for seatbelts, doors, or engine alerts.
4.Industrial Equipment
1.Warns workers of malfunction or operational hazards.
5.Door Bells & Attention Systems
1.More noticeable than single-tone buzzers.
-
-
₹4,436.00 -
A Light Activated Motor Controller using IC 555 is a simple electronic circuit that turns a motor ON or OFF based on the presence or absence of light. It uses a LDR (Light Dependent Resistor) as a light sensor and the 555 timer IC in a comparator mode, along with an LED to indicate the motor’s status.
₹280.00 -
₹136,940.00
Related products
-
A Water Level Indicator is an electronic device used to detect and display the level of water in a tank or reservoir. It helps prevent overflow and dry running of pumps by giving alerts or showing water levels in real time.
₹170.00 -
A NOR gate using transistors is a basic digital logic circuit that outputs HIGH (1) only when all inputs are LOW (0). It’s built by combining an OR gate followed by a NOT gate, using simple NPN transistors.
₹150.00 -
A Panic Alarm Button is a simple safety device that, when pressed, immediately activates a loud alarm, buzzer, or alert system to signal an emergency or request for help. It’s commonly used in homes, banks, hospitals, and personal security systems.
₹160.00 -
An RGB LED is a light-emitting diode that combines Red, Green, and Blue LEDs in a single package. By adjusting the brightness of each color, it can produce millions of colors, making it ideal for decorative lighting, displays, and indicators.
₹140.00 -
A Fire Detector Alarm is an electronic system designed to detect the presence of fire or high heat and trigger an audible or visual alarm. It typically uses sensors like thermistors, temperature sensors, or flame sensors to detect abnormal conditions indicating fire.
₹190.00 -
A Flip-Flop LED Flasher is a simple electronic circuit that alternately turns two LEDs on and off in a continuous loop, creating a blinking or “flashing” effect. It’s commonly built using transistors, resistors, capacitors, and LEDs, forming an astable multivibrator — a basic circuit that oscillates between two states without any external triggering.
It’s often used for decoration, indicators, or learning basic electronics.
₹175.00
