Vehicle Tilt Monitoring System
₹185.00
In StockA Vehicle Tilt Monitoring System is an electronic safety system that detects abnormal tilting or leaning of a vehicle, such as when it is on a slope, at risk of tipping, or has experienced an impact. It alerts the driver or shuts down the system to prevent accidents.
Description
A Vehicle Tilt Monitoring System is a smart safety device designed to monitor the orientation of a vehicle in real time. It uses tilt sensors such as gyroscopes, accelerometers, or tilt switches to detect angular deviation from the vehicle’s normal posture. When the tilt exceeds a safe limit—either side-to-side (roll) or front-to-back (pitch)—the system triggers a warning (like an LED or buzzer) or communicates with onboard systems to take corrective actions, such as slowing the vehicle or stopping machinery.
This system is especially useful for:
- Two-wheelers, to detect falls
- Heavy vehicles, to prevent rollovers
- Construction machinery, which operate on uneven terrain
- Off-road vehicles and autonomous robots, where balance is crucial
Applications of Vehicle Tilt Monitoring System:
1.Motorcycle and Scooter Safety
1.Detects falls and alerts emergency services or kills engine.
2.Heavy Equipment and Construction Vehicles
1.Monitors stability of cranes, bulldozers, or forklifts on uneven ground.
3.Off-road and Adventure Vehicles
1.Prevents rollover by giving early tilt warnings.
4.Autonomous Vehicles and Drones
1.Maintains stability during movement and adjusts control accordingly.
5.Agricultural Machinery
1.Prevents toppling of tractors and harvesters on sloped fields.
6.Fleet Management
1.Monitors tilt and crash data for insurance or safety purposes.
-
A solar-based LED system is a lighting setup that uses solar energy to power LED (Light Emitting Diode) lights. During the day, a solar panel captures sunlight and converts it into electrical energy, which is stored in a battery. At night or in low-light conditions, this stored energy powers the LED light.
These systems are eco-friendly, cost-effective, and ideal for off-grid or outdoor applications like street lighting, garden lights, and emergency lighting.
₹250.00 -
₹4,742.00 -
Photo phobic robot will sense the light and will try to move away from light. On the contrary photo phobic is exactly opposite where it does not follow the light or more precisely it avoids and goes to places where there is less light
Â
₹1,250.00 -
An object-avoidance robot is a type of autonomous robot designed to detect and avoid obstacles.
₹1,250.00 -
A Flip-Flop LED Flasher is a simple electronic circuit that alternately turns two LEDs on and off in a continuous loop, creating a blinking or “flashing” effect. It’s commonly built using transistors, resistors, capacitors, and LEDs, forming an astable multivibrator — a basic circuit that oscillates between two states without any external triggering.
It’s often used for decoration, indicators, or learning basic electronics.
₹175.00 -
To measure distance using an ultrasonic sensor and display the result on an LCD with an 8051 microcontroller, you’ll need to interface several components: an ultrasonic sensor (e.g., HC-SR04), an LCD (e.g., 16×2), and the 8051 microcontroller.
Related products
-
A Tri-Tone Buzzer is an audio signaling device that produces three distinct tones in a sequence or pattern. It’s commonly used in alarms, emergency systems, and attention-grabbing devices to indicate different conditions or alert levels.
₹180.00 -
A Touch ON/OFF Switch is an electronic circuit that allows a device to be turned on or off by simply touching a sensor pad or wire, instead of using a mechanical switch. It works by detecting a small electrical signal from the human body (capacitive or resistive touch) and using that to toggle the output state.
These switches are commonly used in modern electronics, home automation, and DIY projects due to their durability, aesthetic appeal, and user-friendly operation.
₹150.00 -
A Water Level Indicator is an electronic device used to detect and display the level of water in a tank or reservoir. It helps prevent overflow and dry running of pumps by giving alerts or showing water levels in real time.
₹170.00 -
A NOR gate using transistors is a basic digital logic circuit that outputs HIGH (1) only when all inputs are LOW (0). It’s built by combining an OR gate followed by a NOT gate, using simple NPN transistors.
₹150.00 -
A traffic light control circuit using IC CD4017 is a simple digital electronics project that mimics the working of a real traffic light system. It uses the CD4017 decade counter IC along with a timer (usually 555 IC) to sequentially switch Red, Yellow, and Green LEDs, simulating the flow of traffic signals.
₹250.00 -
A Flip-Flop LED Flasher is a simple electronic circuit that alternately turns two LEDs on and off in a continuous loop, creating a blinking or “flashing” effect. It’s commonly built using transistors, resistors, capacitors, and LEDs, forming an astable multivibrator — a basic circuit that oscillates between two states without any external triggering.
It’s often used for decoration, indicators, or learning basic electronics.
₹175.00
